Welcome to our website!

automatic tapping and drilling machine

/ss-4508-gear-type-tapping-machine(vertical).htmlGear type automatic tapping machine

 

JT-4508

Features:

1:in the motor,there is a independent fan which forces to lose heat,which makes it continuously operate,be stable and durable.

2:using solid pillar,though tempering treatment to eliminate stress,plated with hard chromium,rub resisting and no rust.

3:it can work continuously and circularly in high speed.

 

 

The main technical parameters.

Travel of spindle Front-end of spindle Screw tooth diameter The head of the move from up and down The main axis is the distance from the mesa Workbenchsize
Max(mm) Type(mm) (mm) (mm) (mm) (mm)

45

JT-2 2-8 260 350 225*230
CT-12 10

 

motor        (R.P.M) Automatic transmission pitch Multiaxial capacity Boundary dimension(mm) Gross weight
50HZ 60HZ Number of teeth pear inch (mm) Standard pitch(mm)
1340 1600 (1.75) 730*520* 820 145kg
3PH 64,56,48 0.2 0.25 0.3 M3*10axle
4P 760 900 44,40,32 0.35 0.4 0.45 M4*5axle
1.1KW/0.75KW 28,24,20, 0.5 0.6 0.7 M5*2axle L*W*H
(1/2HP) 420 500 18,16 0.75 0.8 0.9 1.0 1.25

SS-4508

Features:

1:vertical and stable,accurate and safe.

2:when tapping,tapped products will not jump up.

3:operate easily,promote work efficiency.

4:can work continuously and circularly in high speed for long time,be stable and durable.

 

 

 

Horizontal gear pitch automatic tapping machine

 

*when the vertical machine could not meet the conditions of work, available horizontal dedicated machine.

 

*The gear type device replaces A,B gears,taps with pitch of thread.

Big different from lead screw type.

 

1:fine pitch limitation.

 

2:uneasy to remove and replace.

 

3:cannot rotate in high speed,limit production.

 

4:Because of long-time friction,fast abrasion and wear of the lead screw type causes quality problem.

 

 

 

 

 

 

 

 

 

 

JT-6516

 

Features:

 

1:Beginner also can operate it smoothly.Because of automatic cycle operation.,both of hands can completely from the tapper.

2:High precision tapping stroke,adjust easily. Cause automatic reversing device can freely adjust tapping stroke.

 

The main technical parameters:

 

Travel of spindle Front-end of spindle Screw tooth diameter The head of the move from up and down The main axis is the distance from the mesa
Max.(mm) (mm) (mm) (mm) (mm)
65 MT-2 5-16 300 470
ER-25 collet chuck

 

motor        (R.P.M) Automatic transmission pitch Multiaxial capacity Boundary dimension(mm) Gross weight
50HZ 60HZ Number of teeth pear inch (mm) Standard pitch(mm)
560 720 1000*640*1190 310kg
3PH 10 11 12 13 14 0.5 0.6 0.7 0.75 M6*9axle
6P 400 480 16 18 19 20 24 0.8 0.9 1.0 1.25 1.5 M8*4axle
2.2KW 26 27 28 32 40 1.75 1.8 2.0 2.5 M12*2axle L*W*H
(1/2HP) 260 300

 

 

SS-6516

Features :

 

1:Double safety device prevent screw tap from wrecking.The main spindle rotates with up,down forward and backward feed.The main spindle can automatic stop when encounter impurity,then reverse and retract not to damage the cutter.

 

2:Multi-spindle device can product in high efficiency:Multi-spindle can be installed on the main spindle ,which promote production efficiency.

 

 

 

 

 

 

 

 

 

JT-6532

Features:

1:in the motor,there is a independent fan which forces to lose heat,which makes it continuously operate,be stable and durable.

2:using solid pillar,though tempering treatment to eliminate stress,plated with hard chromium,rub resisting and no rust.

3:it can work continuously and circularly in high speed.

 

Travel of spindle Front-end of spindle Screw tooth diameter The head of the move from up and down The main axis is the distance from the mesa
Max.(mm) (mm) (mm) (mm) (mm)
65 MT-2 5-32 300 470
ER-25 collet chuck

 

motor        (R.P.M) Automatic transmission pitch Multiaxial capacity Boundary dimension(mm) Gross weight
50HZ 60HZ Number of teeth pear inch (mm) Standard pitch(mm)
560 720 770*640*1200 360kg
3PH 10 11 12 13 14 0.5 0.6 0.7 0.75 M10*10axle
6P 150 180 16 18 19 20 24 0.8 0.9 1.0 1.25 1.5 M16*4axle
2.2KW 26 27 28 32 40 1.75 1.8 2.0 2.5 M20*2axle L*W*H
(1/2HP) 80 100 3.0 3.5

 

 

 

 

 

 

 


Post time: Oct-16-2019